Back to Top
WEIDMULLER U REMOTE I/O UR20-8DO-P- 1315240000
Description:
- Digital output modules are offered in the following versions: 4 DO, 8 DO with two or three wires, and 16 DO with or without a PLC interface.
- Their primary function is to integrate decentralized actuators.
- In accordance with DIN EN 60947-5-1 and IEC 61131-2 requirements, all outputs are made for DC-13 actuators.
- It can reach frequencies of up to 1 kHz, just like the digital input modules.
- Maximum system safety is ensured by protecting the outputs.
- This includes a restart that happens automatically after a short circuit.
- Both the overall module state and the status of individual channels are indicated by easily visible LEDs.
- The range includes unique variations like the 4RO-SSR module for quickly switching applications in addition to the typical uses for digital output modules.
- With solid-state technology installed, each output may receive 0.5 A.
- For applications requiring a lot of power, there is also the 4RO-CO relay module.
- It has four CO contacts, is designed for a switching current of 5 A, and is optimized for a switching voltage of 255 V UC.
Specifications:
- Depth: 76 mm.
- Height: 120 mm.
- Width: 11.5 mm.
- Mounting dimension height: 128 mm.
- Storage temperature: -40 °C ... +85 °C.
- Operating temperature: -20 °C ... +60 °C.
- Actuator connection: 2-wire.
- Inductive load (DC13): 0.2 Hz.
- Lamp load (12 W): 1 kHz.
- Number of digital outputs: 8.
- Output current as per application:
- Min: 0 mA.
- Nominal: 4,000 mA.
- Max: 4,000 mA.
- Output current per channel, max: 500 mA.
- Output current per module, max: 4,000 mA.
- Type of connection: PUSH IN.
- Wire connection cross section, finely stranded, max: 1.5 mm².
- Wire connection cross section, finely stranded, min: 0.14 mm².
- Wire cross-section, finely stranded, max. (AWG): AWG 16.
- Wire cross-section, finely stranded, min. (AWG): AWG 26.
- Wire cross-section, solid, max: 1.5 mm².
- Wire cross-section, solid, max. (AWG): AWG 16.
- Wire cross-section, solid, min: 0.14 mm².
- Wire cross-section, solid, min. (AWG): AWG 26.
- Voltage supply: 24 V DC +20 %/ -15 % via the system bus.
- Galvanic isolation: 500 V DC between the current paths.
- Interface: u-remote system bus.
- Module type: Digital output module.
- Possible connection: 2-wire.
- Transmission speed of system bus, max: 48 Mbit.
Write Your Own Review
Bestsellers
10/100/1000 5 Port Switch
ZAR 1,397.77
ZAR 1,215.45
Battery to Inverter Cable 2,5m Length x 25mm Positive & Negative
ZAR 1,633.00
ZAR 1,420.00
