WIFI Transmitter ( 9 Buttons)

Yottacontrol A-3288 WiFi Transmitter Quick Start

More Information:

The Yottacontrol A-3288 WiFi Transmitter had a two-way communication to communicate with the Yottacontrol A-52 WiFi series controller. The Yottacontrol A-52 WiFi series controller had installed an initial
program in it. So you just need to power-on the A-3288 and press the button can control the A-52 WiFi
controller directly.
Turn the Blue Key to START position to Power-On the A-3288. And during the A-3288 any setup function, if
type wrong parameter, you can turn the Blue Key from ON to START to clear the setting.
Yottacontrol A-3288 WiFi Transmitter Display menu structure
Depend on A-3288’s switch status (RUN/SETUP), the display will show below figure, and can via the button to
complete below setting.
Note: at SETUP mode, press OK more than 3 Sec can modify the parameter, when complete press OK more
than 3 Sec to store the setting.
1. Setup mode
1.1 Edit mode
1.1.1 WiFi Setup menu
In the WiFi Setup menu, you can edit the parameter as above graph.
SSID: You must type the A-52 WiFi controller’s SSID. (note, the initial SSID is 52WIFI)
Password: Type the A-52 WiFi controller’s password.
MAC Address: It’s the A-3288’s isolate value, read only.
Port: Edit the port.
Device ID: Range 1-7. You must set the Device ID for different value to communicate with the A-52 WiFi
controller for avoiding ID conflict.
TX Power: Range 1-12, the initial setting is 12 (0:weak~12:strong).
1.1.2 Device Setup
1.1.2.1 Device func menu
In the Device func menu, you can edit the parameter as above graph.
PW-On Mode: It had 2 Power-On options. The standard is mean when the I0 (Emergency) press, the A-3288
can’t correctly to Power-On. The Simple is mean A-3288 can correctly to Power-On without any limitation.
LED Spark: When the A-3288 working, the LED indicator will keep sparking in a cycling period. You can set up
the spark ON & OFF period.
Sleep Mode: During the Sleep period, if not press the A-3288’s button. The A-3288 will auto power-off.
Key Passwor: You can set up the A-3288’s Power-On password for security condition. The Password is used the
I0~I8 button. When power-on, if press the wrong password, the A-3288 will not work. And Led Indicator will
show orange light.
1.1.2.2 Display menu
RSSI/Bat. : Can choose RSSI (Received Signal Strength Indicator) and Battery display ON or OFF on the
LCM.
LCM Power: Can choose LCM ON or OFF. If choosing OFF, the LCM will disappear during the operate for
decreasing power consumption.
Backlight: You can adjust the LCM’s backlight in this menu. (0%, 50%, 100%)
Language: The A-3288 LCM offer English, ChineseBig5, Chinese option.
2. Run mode
In this mode, the A-3288’s LCM display will as same as the A-52 WiFi controller.
3. LED Indicator
In successful connection condition, when press the I0~I8 button, the LED Indicator will show green light.
In failed connection condition, when press the I0~I8 button, the LED Indicator will show orange light.